Intelligent Power Distribution 
Power Supply DC 
EMC Suppressors 
Transformers 
UPS-Systems / Buffer- / Redundancy Modules 
Converters / Rectifiers 
Optocouplers / Semiconductors 
Active Interface Technology 
Passive Interface Technology 
Eurocard Holders / Control Modules 
Control Cabinet Power Outlets 
EMC Filters 
Safety relay 
Relay Modules 
Switches 
Front Panel Interfaces 
Control Cabinet Interfaces 
Pass-through 
Lighting Elements 
Control Devices 
Modular Connection Systems (Modlink Vario) 
Heavy Duty Connectors (Modlink Heavy) 
Cable entry systems 
With open ended wires 
Connection cables 
Y connector 
Valve Connectors 
Field-wireable 
T-coupler 
Flange Connectors 
Bulk cable 
Adapter 
Tool 
Accessories 
Cube67 
Cube20 
Cube20S 
xtremeDB 
IO-Link Devices 
Connectivity Solutions for Cameras 
MVK Metal 
Impact67 
Impact20 
MASI 
M8 Distribution Systems 
M12 Distribution Systems 
7/8'' male 0° IDC V2A
5-pol., 0,75 - 1,5mm², 6,8 - 12,5mm
| Art.No.: | 7002-78091-0000000 |
| Weight: | 0.104 kg |
| Country of origin: | DE |
Available
Description
Male straight
7/8" (5-pole)
IDC terminals
Connection cross section: 0.75...1.5 mm²
Stainless steel 1.4305 (V2A)
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
7/8" (5-pole)
IDC terminals
Connection cross section: 0.75...1.5 mm²
Stainless steel 1.4305 (V2A)
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
Technical Data
Electrical data | Supply
| Current operating per contact max. | 10 A |
|---|---|
| Current phase - neutral | 230 V |
| Current phase - phase | 400 V |
Installation
| Connection cross section min. | 0,75 mm² |
|---|---|
| Connection cross section max. | 1,5 mm² |
| Single wire diameter min. | 0,15 mm |
Installation | Connection
| Wire insulation diameter max. | 2,8 mm |
|---|---|
| Tightening torque | 1,5 Nm |
| Mounting set | 7/8" |
Installation | Pin assignment
| Coding | A |
|---|---|
| No. of poles | 5 |
Device protection | Electrical
| Degree of protection (EN IEC 60529) | IP65, IP67 |
|---|---|
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Rated surge voltage | 4 kV |
| Material group (IEC 60664-1) | I |
Mechanical data | Material data
| Material housing | PA |
|---|---|
| Locking material | Stainless steel 1.4305 (V2A) |
Mechanical data | Mounting data
| Mounting method | inserted, screwed, Shaking protection |
|---|---|
| Clamping range min. | 6,8 mm |
| Clamping range max. | 9,5 mm |
Environmental characteristics | Climatic
| Operating temperature min. | -40 °C |
|---|---|
| Operating temperature max. | 85 °C |
Important installation notes
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
|---|---|
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
Commercial data
| ECLASS-6.0 | 27279221 |
|---|---|
| ECLASS-7.0 | 27440104 |
| ECLASS-8.0 | 27440104 |
| ECLASS-9.0 | 27440102 |
| ECLASS-10.1 | 27440102 |
| ECLASS-11.1 | 27440102 |
| ECLASS-12.0 | 27440116 |
| ETIM-5.0 | EC002635 |
| customs tariff number | 85366990 |
| GTIN | 4048879111461 |
| Packaging unit | 1 |
Accessories
---- Connection Cable ----
---- Torque Wrench ----
---- Cable Stripper ----
---- Cable Shear ----
---- Cable Cutter ----
---- Side Cutter ----
